rabbitmqctl参数命令如下：
Usage:
rabbitmqctl [-n <node>] [-t <timeout>] [-l] [-q] <command> [<command options>]
General options:
-n node
-q quiet
-t timeout
-l longnames
Default node is "rabbit@server", where `server` is the local hostname. On a host
named "server.example.com", the node name of the RabbitMQ Erlang node will
usually be rabbit@server (unless RABBITMQ_NODENAME has been set to some
non-default value at broker startup time). The output of hostname -s is usually
the correct suffix to use after the "@" sign. See rabbitmq-server(1) for
details of configuring the RabbitMQ broker.
Quiet output mode is selected with the "-q" flag. Informational messages are
suppressed when quiet mode is in effect.
Operation timeout in seconds. Only applicable to "list" commands. Default is
"infinity".
If RabbitMQ broker uses long node names for erlang distribution, "longnames"
option should be specified.
Some commands accept an optional virtual host parameter for which
to display results. The default value is "/".
Commands:
add_user <username> <password>
add_vhost <vhost>
authenticate_user <username> <password>
cancel_sync_queue [-p <vhost>] queue
change_cluster_node_type <disc|ram>
change_password <username> <password>
clear_global_parameter <key>
clear_operator_policy [-p <vhost>] <key>
clear_parameter [-p <vhost>] <component_name> <key>
clear_password <username>
clear_permissions [-p vhost] <username>
clear_policy [-p <vhost>] <key>
clear_topic_permissions [-p vhost] <username> [<exchange>]
clear_vhost_limits [-p <vhost>]
close_all_connections [-p <vhost> --limit <limit>] [-n <node> --global] [--per-connection-delay <delay>] <explanation>
close_connection <connectionpid> <explanation>
cluster_status
decode value passphrase [--cipher cipher] [--hash hash] [--iterations iterations]
delete_queue queue_name [--if_empty|-e] [--if_unused|-u]
delete_user <username>
delete_vhost <vhost>
encode value passphrase [--cipher cipher] [--hash hash] [--iterations iterations]
environment
eval <expr>
exec <expr> [--offline]
force_boot
force_reset
forget_cluster_node [--offline] <existing_cluster_member_node>
help <command>
hipe_compile <directory>
join_cluster [--disc|--ram] <existing_cluster_member_node>
list_bindings [-p <vhost>] [<bindinginfoitem> ...]
list_channels [<channelinfoitem> ...]
list_ciphers
list_connections [<connectioninfoitem> ...]
list_consumers [-p vhost] [<consumerinfoitem> ...]
list_exchanges [-p <vhost>] [<exchangeinfoitem> ...]
list_global_parameters
list_hashes
list_operator_policies [-p <vhost>]
list_parameters [-p <vhost>]
list_permissions [-p <vhost>]
list_policies [-p <vhost>]
list_queues [-p <vhost>] [--online] [--offline] [--local] [<queueinfoitem> ...]
list_topic_permissions [-p <vhost>]
list_unresponsive_queues [--local] [--queue-timeout <queue-timeout>] [<unresponsiveq_ueueinfoitem> ...]
list_user_permissions <username>
list_user_topic_permissions <username>
list_users
list_vhost_limits [-p <vhost>] [--global]
list_vhosts [<vhostinfoitem> ...]
node_health_check
purge_queue <queue>
rename_cluster_node <oldnode1> <newnode1> [oldnode2] [newnode2] ...
report
reset
restart_vhost [-p <vhost>]
rotate_logs
set_cluster_name <name>
set_disk_free_limit <disk_limit>
set_disk_free_limit mem_relative <fraction>
set_global_parameter <name> <value>
set_operator_policy [-p <vhost>] [--priority <priority>] [--apply-to <apply-to>] <name> <pattern> <definition>
set_parameter [-p <vhost>] <component_name> <name> <value>
set_permissions [-p <vhost>] <username> <conf> <write> <read>
set_policy [-p <vhost>] [--priority <priority>] [--apply-to <apply-to>] <name> <pattern> <definition>
set_topic_permissions [-p <vhost>] <username> <exchange> <write_pattern> <read_pattern>
set_user_tags <username> <tag> [...]
set_vhost_limits [-p <vhost>] <definition>
set_vm_memory_high_watermark <fraction>
set_vm_memory_high_watermark absolute <value>
shutdown
start_app
status
stop [<pidfile>]
stop_app
sync_queue [-p <vhost>] queue
trace_off [-p <vhost>]
trace_on [-p <vhost>]
update_cluster_nodes <existing_cluster_member_node_to_seed_from>
wait [<pid_file>] [--pid|-P <pid>]
<queueinfoitem> must be a member of the list [name, durable, auto_delete, arguments, policy, pid, owner_pid, exclusive, exclusive_consumer_pid, exclusive_consumer_tag, messages_ready, messages_unacknowledged, messages, messages_ready_ram, messages_unacknowledged_ram, messages_ram, messages_persistent, message_bytes, message_bytes_ready, message_bytes_unacknowledged, message_bytes_ram, message_bytes_persistent, head_message_timestamp, disk_reads, disk_writes, consumers, consumer_utilisation, memory, slave_pids, synchronised_slave_pids, state].
<bindinginfoitem> must be a member of the list [source_name, source_kind, destination_name, destination_kind, routing_key, arguments].
<connectioninfoitem> must be a member of the list [pid, name, port, host, peer_port, peer_host, ssl, ssl_protocol, ssl_key_exchange, ssl_cipher, ssl_hash, peer_cert_subject, peer_cert_issuer, peer_cert_validity, state, channels, protocol, auth_mechanism, user, vhost, timeout, frame_max, channel_max, client_properties, recv_oct, recv_cnt, send_oct, send_cnt, send_pend, connected_at].
<channelinfoitem> must be a member of the list [pid, connection, name, number, user, vhost, transactional, confirm, consumer_count, messages_unacknowledged, messages_uncommitted, acks_uncommitted, messages_unconfirmed, prefetch_count, global_prefetch_count].
<exchangeinfoitem> must be a member of the list [name, type, durable, auto_delete, internal, arguments, policy].
<vhostinfoitem> must be a member of the list [name, tracing, cluster_state].
<consumerinfoitem> must be a member of the list [queue_name, channel_pid, consumer_tag, ack_required, prefetch_count, arguments].
<unresponsive_queueinfoitem> must be a member of the list [name, durable, auto_delete, arguments, pid, recoverable_slaves].
|
|手机版|小黑屋|架构师
( 鲁ICP备14021824号-2 )|网站地图
发表于 2018-4-8 21:55:34
楼主